SmartSkid Controller 1.4.54 - App Store

---

About SmartSkid Controller

The SmartSkid Controller is the wireless interface into the SmartSkid and SmartTrailer tools by RPM Industries, LLC. The SmartSkid Controller allows you to: - Monitor the amount of fluid in all tanks - Pre-program clean...

The SmartSkid Controller is the wireless interface into the SmartSkid and SmartTrailer tools by RPM Industries, LLC. The SmartSkid Controller allows you to: - Monitor the amount of fluid in all tanks - Pre-program clean fluid delivery amounts - Manually operate the pump using the jog feature - Update controller software over the air The SmartSkid Controller will alert you when: - Clean or used tanks are full - Clean tank doesn't have enough capacity for pre-programmed delivery amount - Leak detected in containment - Pump is not working optimally

Version History Updated controller firmware (2730) - added compatibility with 150 Gallon Enclosed SmartTrailer (109212) 1.4.54 12/31/2024 * Updated firmware (2697): * fix a potential issue with low battery power causing nvdata corruption 1.4.53 11/16/2024 Fix an issue with iOS18 not showing App Preferences in the Settings App. 1.4.51 09/27/2024 Add calibration screen for use with V2 controllers. 1.4.50 08/15/2024 Update controller firmware (2640) - Add skid 108973 to list of part numbers with heater cycling - Add skid 109106 1.4.49 07/26/2024 Heater cycling enabled. Bug fix to prevent endless reboots under certain situations. Add part number 108973. 1.4.48 05/07/2024 Added skid part number 108535. 1.4.44 11/15/2023 Update controller firmware (2329) to fix an issue with some skids/trailers (80 gallons and larger) where the controller incorrectly indicated a full tank based on the sensor reading. 1.4.43 08/14/2023 Update controller firmware (2327) to include new skids and trailers. Also fixes an issue with some 400 Gallon trailers (poly tanks) where the fluid level could rise into the dead band of the sensor causing a fault. 1.4.42 08/12/2023 Remove "JOG LOCK" functionality. The JOG button will continue to run the pump as long as it pushed. Sliding your finger off of the button will no longer "LOCK" the pump on. The pump will stop running as soon as you lift your finger regardless of the location of your finger at the time. 1.4.41 07/31/2023 Update controller firmware (2246) to include new skids and trailers. Allows recovery from low voltage fault without rebooting the controller when voltage returns to 12V. 1.4.40 07/12/2023 Add ability to use camera to take a picture of the skid/trailer tag during the on-boarding process to make it easier to setup communications with the skid/trailer. Update controller firmware (2210) to include new skids and trailers. Also disables fault logging unless a pump or valve are operating. 1.4.39 06/13/2023 Fix an issue with connecting to some older controllers (V1.4 and older). 1.4.37 12/05/2022 Fix an issue with pumping on older controllers. 1.4.36 10/29/2022 Updated 108093 trailer part number to compatibility list. Updated firmware (2029) to include 108093 trailer. 1.4.35 09/26/2022 Fix an issue with pumping on older controllers. 1.4.34 08/06/2022 Fix an issue with older controllers not recognizing new configuration in previous version. 1.4.33 08/03/2022 Added voltage indicator to show the battery voltage as well as the sensor voltage. Fixed issue with used tank heater temperature not showing correctly. Updated firmware (1979): - include voltage readings - fix a potential issue with update process using incorrect part number after update 1.4.32 08/02/2022 Updated firmware (1839): - fix an issue with Arctic 100 Gallon Skids not showing the temperature of the fluid in the used tank properly - fix an issue with Arctic 100 Gallon Skids not showing the temperature of the heater element in the used tank properly 1.4.31 05/19/2022 Updated firmware to improve update processing and added compatibility for V3.1 controllers. Added part numbers for compatibility with V3.1 controllers. 1.4.30 04/29/2022 New Firmware Version (1772) fixes intermittent issue with temperatures defaulting to 32 degrees. 1.4.29 04/07/2022 Fixed issue with Controller Update progress bar not working properly. New Firmware Version (1759) fixes intermittent issue with temperatures defaulting to 32 degrees. Moved "Reboot" button to avoid accidental activation. Moved "Manual" button for easier access. Fixed layout issues with iPhone app. 1.4.28 03/24/2022 Added heater temperature indicator to show the temperature of the heater element when heating. Added a heater indicator to show when the heater element is on (HTR on each tank gauge) when AC is plugged in. Added a controller reboot button to allow the controller to rebooted without having to power cycle the skid or trailer (Reboot lower right corner). Centered the Jog and Run/Stop buttons on the clean tank gauge. Added system fault alert dialog box to show when controller is in a fault state and what that state is. Updated firmware to version B1.04.1751. 1.4.26 03/18/2022 Updated to support skids and trailer with our cold weather package. Added ability to close valves by toggling the "Evacuate Engine" or "Refill Tank" buttons. Moved the "Jog" button under the Clean tank gauge. Thinned out the gauge bezels to help clarify the volume display. 1.4.9 02/18/2022 Update to support 100 Gallon Lube Skids (702352). 1.4.6 11/02/2021

---

Previous Versions

Here you can find the changelog of SmartSkid Controller since it was posted on our website on 2023-09-06 18:24:14. The latest version is 1.4.54 and it was updated on 2026-10-13 13:40:50. See below the changes in each version.

---

Related Apps

Here you can find apps that are similar with SmartSkid Controller.

---

Disclaimer